清洁与保养

1防止在搬运中出现的碰伤。

2清洁时，先用软布或干棉纱除灰尘，再用干布沾少许防锈机油擦抹，最后用干布抹干，保持干燥

3在不锈钢表面涂一层上光蜡，并用经常揩擦上光，保持常新，延长使用寿命。

Maintenance of products :

1 Prevention from the scratches during the conveying process. 

2.Try not to moisten the metallic plating pieces. Sweep with soft cloth or dry cotton yarn, then wipe out with dry cloth stained with a little anti-rust oil. Finally dry up with dry cloth. Keep dry.

3 Coat one-layer light wax on the surface of the stainless steel. Keep it new, and prolong its service life.

使用说明：

放在合适的位置不需固定

踏下脚踏，开关按钮，盖子打开

放入垃圾

松开脚踏，盖子自动盖上

清洁时可以提出内胆，将垃圾倒出

Open the lock with the key ,Position the bores according to the product. Drill φ 6 bores respectively with impact driller, after the center line for bolt bore is drawn in the appropriate position on the wall.

Knock plastics bulge into the wall with hammer. Don't let it outstand the wall. Use a knife to cut out the prominent part.

Aim the screw toward the plastics bulge taphole, press tight into the wall.

Use ST4.2 screws to fix main body on the wall.

Open the lock with the key, lift the cover and put into toilet paper.