清洁与保养

1、防止在搬运中出现的碰伤。

2、清洁时，先用软布或干棉纱除灰尘，再用干布沾少许防锈机油擦抹，最后用干布抹干，保持干燥

3、在不锈钢表面涂一层上光蜡，并用经常揩擦上光，保持常新，延长使用寿命。

Maintenance of products:

1、Prevention from the scratches during the conveying process. 

2、Try not to moisten the metallic plating pieces. Sweep with soft cloth or dry cotton yarn, then wipe out with dry cloth stained with a little anti-rust oil. Finally dry up with dry cloth. Keep dry.

3、Coat one-layer light wax on the surface of the stainless steel. Keep it new, and prolong its service life.

晾衣器安装步骤：

根据产品安装孔位、房间空间及凉衣数量确定主体与附件距离，在墙面相应位置画出螺钉孔中心线后，用冲击钻分别钻φ6孔。

用铁锤小心将塑料胀塞打入墙面，不能突出墙面，可用小刀切除露墙外的部分。

用ST4.2螺丝将塑料底座和金属底座一块固定在墙面上。

将主体对准底座，并且按在底座上。

用螺丝将主体固定在底座上。

用螺丝将附件固定在对面墙面上。

解锁主体上的绳索，拉出绳子，将绳子头部挂入附件孔内即可凉衣。

Position the bores,  an assurance distance between main body and enclosure according  to  room space and drying dress amount. Drill φ 6 bores respectively with impact driller,after the center line for bolt bore is drawn in the appropriate position on the wall.

Knock plastics bulge into the wall with hammer. Don't let it outstand the wall. Use a knife to cut out the prominent part.

Fix plastics base and metal base on the metope with ST4.2 screws.

Aim the main body toward the base, and press it onto the base.

Use screws to fix main body  onto the base .

Use screws to fix  accessories onto the opposite wall .

Unloose the cord from main body, pull up a cord, hang its head into the enclosure of the accessories, then cooling dress appliance works.