清洁与保养

1、防止在搬运中出现的碰伤。

2、清洁时，先用软布或干棉纱除灰尘，再用干布沾少许防锈机油擦抹，最后用干布抹干，保持干燥

3、在不锈钢表面涂一层上光蜡，并用经常揩擦上光，保持常新，延长使用寿命。

Maintenance of products:

1、Prevention from the scratches during the conveying process. 

2、Try not to moisten the metallic plating pieces. Sweep with soft cloth or dry cotton yarn, then wipe out with dry cloth stained with a little anti-rust oil. Finally dry up with dry cloth. Keep dry.

3、Coat one-layer light wax on the surface of the stainless steel. Keep it new, and prolong its service life.

双入墙卷纸架安装步骤：

根据产品安装孔位，在墙面相应位置画出螺钉孔中心线后，用冲击钻分别钻φ6孔。

用铁锤小心将塑料胀塞打入墙面，不能突出墙面，可用小刀切除露墙外的部分。

用ST4.2螺丝将主体固定在墙面上。

Paper Holder in wall installation steps:

Position the bores according to the product. Drill φ 6 bores respectively with impact driller, after the center line for bolt bore is drawn in the appropriate position on the wall.

Knock plastics bulge into the wall with hammer. Don't let it outstand the wall. Use a knife to cut out the prominent part.

Use ST4.2 screws to fix base on the wall.