产品特点：

主体采用优质铝镁钛合金制作，表面阳极氧化，形成防划伤、耐腐蚀的致密层，氧化厚度达到8-10um，表面硬度达到9-12度，色泽亮丽持久。

Features:

The main body is made of quality aluminum. The surface has been anodizing processed, forming the dense layer with anti-scratch, and anti-corrosion, oxide thickness of 8-10 um, surface hardness 9-12, brilliant lasting color.

产品保养：

1、防止在搬运中出现的碰伤。

2、清洁时，尽量不要弄湿金属镀件，先用软布或干棉纱除灰尘，可用布或者棉花沾上糊状的去污粉，来回轻擦，去除污迹。最后用干布抹干，保持干燥。不可以使用有颜色的清洁剂，或用力破坏表面层。

3、五金在使用中。应防止酸碱盐类的侵蚀和沾污。

Maintenance of products:

1、Prevent scratches in delivery.

2、When cleaning, do not get wet the metal plating part. First dust it with soft cloth or cotton yarn, You can soak the cloth or cotton with cleanser to remove the smear. Last dry it up with cloth. Keep it dry. Do not use colored cleanser or destroy the surface with force.

3、When in use, prevent from corrosion and staining.

安装步骤:

根据产品安装孔位，在墙面相应位置画出螺钉孔中心线后，用冲击钻分别钻φ6孔。

用铁锤小心将塑料胀塞打入墙面，不能突出墙面，可用小刀切除露墙外的部分。

用ST4.2螺丝将底座固定在墙面上。

将主体向底座对准，并且放到位。

将主体用M5的内六角紧顶螺钉固定在底座上。

Position the bores according to the product. Drill φ 6 bores respectively with impact driller, after The center line for bolt bore is drawn in the appropriate position on the wall.

Knock plastic bulge into the wall with hammer. Don't let it outstand the wall. Use a knife to cut out The prominent part.

Use ST4.2 screws to fix base on the wall.

Aim the shelf toward the base, and put in position.

Fix the shelf on the base with the M5 inner hexangular set screw.