顶固分公司 > 产品营销 > 3500系列 > 产品信息

上一个产品：3591化妆台（配玻璃）     下一个产品：3524单杆毛巾架24"

产品特点:

框架用优质实心H65黄铜棒制作，电镀亮铬，抗腐蚀能力强;造型简洁大方，长方形连接座，底座柱插入连接座，用内六角锁紧螺钉连接，结构合理，牢固，安装方便，遵循QB/T1560-2006《卫生间附属配件》生产。

Features:

The frame is made of high-quality copper, with electroplated chrome, strong corrosion-resistance. Simple shape. Rectangle connection-base, the base pole goes into connection-base, in which

hexangular set screw make close conjunction, with reasonable, firm structure, and convenient installation. Follow Chinese Standard QB/T1560-2006.<the subsidiary accessories of bath room.

 

产品保养:

1、防止在搬运中出现的碰伤。

2、清洁时，尽量不要弄湿金属镀件，先用软布或干棉纱除灰尘，再用干布沾少许防锈机油擦抹，也可以用中性光蜡和植物油防锈擦拭。最后用干布抹干，保持干燥。

3、铜质卫浴五金在使用中，不应超荷。应防止酸碱盐类的侵蚀和沾污。

4、平时不用的铜质卫浴五金，可涂一层防锈剂，并保持干燥。

Maintenance of products:

1、 Prevention from the scratches during the conveying process. 

2、Try not to moisten the metallic plating pieces. Sweep with soft cloth or dry cotton yarn, then wipe out with dry cloth stained with a little anti-rust oil , as well as with neuter

  light-wax and plant oil. Finally dry up with dry cloth. Keep dry.

3、In use, copper bathroom products shouldn't be overloaded, and should be prevented from any kind of chemical erosion.

4、When not in use, copper bathroom products can be coated one-layer anti-rust oil, and kept dry.

双杆毛巾架安装步骤：

根据产品安装孔位，在墙面相应位置画出螺钉孔中心线后，用冲击钻分别钻φ6孔。

用铁锤小心将塑料胀塞打入墙面，不能突出墙面，可用小刀切除露墙外的部分。

用ST4.2螺丝将底座固定在墙面上。

将主体向底座对准，并且放到位。

将主体用M5的内六角紧顶螺钉固定在底座上。

Position the bores according to the product. Drill φ 6 bores respectively with impact driller, after the center line for bolt bore is drawn in the appropriate position on the wall.

Knock plastics bulge into the wall with hammer. Don't let it outstand the wall. Use a knife to cut out the prominent part.

Use ST4.2 screws to fix base on the wall.

 Aim the bath towel wreath toward the base.

Fix the bath towel wreath on the base with the M5 inner hexangular set screw.

 

本站首页 | 关于我们 | 历史文章 | 网站地图 | Google Sitemap | 信息反馈 | 时代财富网 | 网站建设 | 登录管理