顶固分公司 > 产品营销 > P系列精铸不锈钢大门锁 > 产品信息

上一个产品：不锈钢豪华大门锁/P9070SS     下一个产品：P9076MAC欧式豪华插芯锁

1、安装锁具前要仔细阅读说明书，特别注意的是，在没有刷油漆前开孔，油漆干后才将锁安装上。千万不要在油漆未干就装门锁。油漆的挥发性气体会减少锁的使用寿命。

2、锁具在平日开关门的过程中，最好握着执手把锁舌旋进锁体，关好门后再松手，不要用力撞门，否则会减少使用寿命。锁具使用一段时间后，会出现开启不顺畅的现象，不要往锁心内滴机油，将滑石粉或铅笔心的细屑滑入锁心内即可。

3、另外，不要用湿布擦拭锁体和执手，因为有些金属材质的锁具会因此生锈；合金材质的锁具会将镀层磨掉，失去美观的效果。

Lock maintenance of products:

1、Read carefully the specification of the lock before use. Note that if punching hole before being painted, then do not install the lock until the paint is dry. Never install it before the paint gets dry. The volatile gas of the paint can reduce the useful life.

2、In everday use, it is best to hole the handle to insert the lock-tongue into the lock. Do not let off until the door is closed. Do not bang the dcor, otherwise it would reduce its useful life. When used for a time, the lock may not be opened smoothly. Do not dip mechanical oil into the lock. Instead, slip some French chalk or pencil fines into it.

3、In addition, do not use wet cloth to wipe the lock and handle, because some metallic lock might get rusted. The alloy lock may

 

 

豪华欧版锁产品特点：

1、适应门厚45-60mm，

2、使用场所：豪宅、工程配套、写字楼等

3、无锁头，只有执手和面板；

4、表面处理：棕古（MAC）

5、面板规格：580*68（长X宽）,豪华型风格

6、执手面板采用澳洲3#锌合金材料制作,结合特殊的多层电镀工艺，色泽持久、手感细腻，耐腐蚀性能优良，盐雾实验时间远远超过国标要求的24小时,再经硬度4H以上的清漆封闭，烤漆温度达150℃；表面光滑，大大提高了防腐，防划伤能力。且不沾灰尘油污。

 

European-lock features:

1、thickness of the door：40-50mm

2、site of use：the great house，accompany engineering and office building etc

3、no  cylinder，only handle and surface 

4、surface treatment：MAC

5、faceplate specification：580×68（length×width）；deluxe style

6、Keep the hand face plate 3# zinc in Australia  alligation material manufacture, combining many special lamellas  plating craft, the color and luster endure, the feeling of hand is delicate, bearing to decay the function good, the salt fog  experiment time marks 24 hours of request far above the country far, again through the 4 Hs of hardness  above varnish seal, roast to paint the temperature to amount to 150 ℃s;The surface is smooth, raising the antisepsis consumedly, defending the scoring, scuffing ability.And don't be stained with the greasy dirt of dust.

豪华欧版锁安装步骤：

A.        根据安装纸规画线开孔。

B.         安装内外面板，

C.         拧紧螺钉。

European lock installation steps:

A.        Draw lines and make holes according to the intallation specification.

B.         Install the inner and outer plates

C.         Ifix the screws.

 

本站首页 | 关于我们 | 历史文章 | 网站地图 | Google Sitemap | 信息反馈 | 时代财富网 | 网站建设 | 登录管理